[PRCo] Re: H.O. Penn Scale Models/Bowser Trolley Part Needed

[BobDietrich]

Herb:

I notice no one has responded on the list.  Most likely that is because what
you're looking for is getting rare.  I suggest cutting a block of styrene,
drill and tap it to match the hole in the truck, and cementing a side frame
to it.  If you want to take this approach I have a bunch of side frames I
can send you.  

May as well respond off list to bob at dietrichsfam.com

Bob  

-----Original Message-----
From: pittsburgh-railways-bounce at lists.dementia.org
[mailto:pittsburgh-railways-bounce at lists.dementia.org] On Behalf Of Herb
Brannon
Sent: Sunday, December 26, 2010 3:11 PM
To: pittsburgh-railways at dementia.org
Subject: [PRCo] H.O. Penn Scale Models/Bowser Trolley Part Needed

Does anyone have any spare "Commonwealth Side Frames" for the Penn Scale
Models/Bowser I.R.R. Interurban car?
I need the OLD STYLE which attach to the trucks with a small screw. I also
need at least four (4) of these. They can be either the really old style
made of White Metal, or, the next type made of plastic. Just so they are
attached with a screw and not by plugging them into the truck as in the new
style.
-- 
Herb Brannon
In Cuyahoga Valley National Park