[PRCo] Re: H.O. Penn Scale Models/Bowser Trolley Part Needed

[Herb Brannon]

I tried Bowser and they have none of the old style sideframes in stock. I
was recently given two PSM IRR cars. One has the really old whitemetal
sideframes. However, two of them are broken and these are the ones I need to
replace. I would rather replace all four with the plastic type. The
whitemetal ones break too easily. What type do you have available?
On Mon, Dec 27, 2010 at 11:12, BobDietrich <bob.dietrich1 at verizon.net>wrote:

> Herb:
>
> I notice no one has responded on the list.  Most likely that is because
> what
> you're looking for is getting rare.  I suggest cutting a block of styrene,
> drill and tap it to match the hole in the truck, and cementing a side frame
> to it.  If you want to take this approach I have a bunch of side frames I
> can send you.
>
> May as well respond off list to bob at dietrichsfam.com
>
> Bob
>
> -----Original Message-----
> From: pittsburgh-railways-bounce at lists.dementia.org
> [mailto:pittsburgh-railways-bounce at lists.dementia.org] On Behalf Of Herb
> Brannon
> Sent: Sunday, December 26, 2010 3:11 PM
> To: pittsburgh-railways at dementia.org
> Subject: [PRCo] H.O. Penn Scale Models/Bowser Trolley Part Needed
>
> Does anyone have any spare "Commonwealth Side Frames" for the Penn Scale
> Models/Bowser I.R.R. Interurban car?
> I need the OLD STYLE which attach to the trucks with a small screw. I also
> need at least four (4) of these. They can be either the really old style
> made of White Metal, or, the next type made of plastic. Just so they are
> attached with a screw and not by plugging them into the truck as in the new
> style.
> --
> Herb Brannon
> In Cuyahoga Valley National Park
>
>
>
>
>


-- 
Herb Brannon
In Cuyahoga Valley National Park